For a server in your local network of computers on the Internet, several requirements must
1: In MAMP PRO, the host must (as an example we take 'mygreathost') that will later be
accessible from the Internet, functioning properly. Check this by clicking in the host
configuration on the right arrow next to the field "Server Name" on the Hosts tab.
In the web browser, the host must appear.
2: If the server is connected to the Internet via a router, then a so-called port
forwarding (http://en.wikipedia.org/wiki/Port_forwarding) must be set on this router.
Other terms may be used for this such as "port sharing".
Unfortunately, there is no universal protocol or method to set port forwarding.
Terminology and methods differ from router to router.
Example: If the server on the local network has an IP address of 192.168.0.215 and is
listening on port 8888 for Apache connections, then you need to set the router port
forwarding for TCP data to the address 192.168.0.215 and port 8888.
A simple test shows whether the port forwarding is working correctly: Type in the
address bar of a web browser, the public address of your router; Do not forget to
also attach the correct server port with a colon (192.168.0.215:8888). For this, the
server must be running in MAMP PRO.
To get your public address go to http://checkip.dyn.com:8245
3: To avoid having to enter the hard-to-remember numeric IP addresses when accessing a
server, the Domain Name System (DNS) was invented. It translates an easy to remember
name to an IP address. apple.com is 220.127.116.11.
For a small fee Dynamic DNS providers update your server address changes, as it can
happen approximately every 24 hours at private DSL connections.
Open an account with a Dynamic DNS provider and create a host, a 'mygreathost'.
If you take no-ip.org as a provider, then the public name of the host is
Then find your public IP address and enter it on the website of your Dynamic DNS
provider for the 'mygreathost' one.
If you have configured everything correctly up to this point, you can reach your
host from the Internet: mygreathost.no-ip.org:8888
4: The last step is simple: You enter the account details of the Dynamic DNS provider
in MAMP PRO in a tab "Dynamic DNS". Use correct spelling of your username and password.
Note: The host name in MAMP PRO does not need to match the host name with a Dynamic DNS
provider match, but equality helps to avoid confusion.